Agency Links
IN.gov Links
Gov. Eric J. Holcomb
Eric J. Holcomb
Eric J. Holcomb
Visit His Homepage

Air Quality in Indiana

Air Quality Index

How clean is the air in your metropolitan area or county? Use this map to find out.

The U. S. Environmental Protection Agency (EPA) has provided a scale called the Air Quality Index (AQI) for rating air quality. The AQI scale is based on the National Ambient Air Quality Standards (NAAQS) and is described in the Code of Federal Regulations, Part 58, Appendix G. This map is based on the EPA AQI scale.

The latest AQI imagery available is for January 26, 2022 as of 2:10 pm EST (Eastern Standard Time).Click on any of the boxes on the image for a detailed map of all the sites monitoring AQI pollutants in that area.
You can also view a tabular presentation of the Air Quality Index (AQI) Report for the entire state.

PLEASE NOTE: Data in this image is collected from IDEM air monitoring sites, local agencies, and private monitoring networks. This data has not been verified by the IDEM or the responsible entity and may change. While this is the most current data, it is not official until it has been certified by the appropriate technical staff. This image is updated hourly.

The image above shows the Air Quality Index (AQI) ratings for each of the NAAQS pollutants that are measured real-time and the critical pollutant that is driving the AQI rating in each metropolitan area, county or other area where pollutant levels are monitored by the IDEM. The critical pollutant is the pollutant with the highest AQI rating measured in the area. The image is updated each hour and covers the period from midnight through the indicated ending time.

Return to Top

Which Pollutants Can I Monitor Using the AQI?

There are five pollutants that go into the Air Quality Index: ozone, carbon monoxide, sulfur dioxide, nitrogen dioxide, and particulate matter. In the image above, each monitoring area is represented by a small box which is color coded to match the AQI rating for the day (see Interpreting the AQI). Inside the box, the pollutant that is driving the AQI rating is identified by its abbreviation (see the table below). At the bottom of each box is a small legend that indicates which pollutants are actively measured in that area. Each of the smaller boxes is color coded to match the AQI rating for that specific parameter. Please note that not all pollutants are measured in all areas or at all sites. The table below briefly describes each pollutant that goes into the AQI.

OzoneO3Ozone is a form of oxygen with three atoms instead of the usual two atoms. It is a photochemical oxidant and, at ground level, is the main component of smog. Unlike other gaseous pollutants, ozone is not emitted directly into the atmosphere. Instead, it is created in the atmosphere by the action of sunlight on volatile organic compounds and nitrogen oxides.

In general, higher levels of ozone usually occur on sunny days with light winds, primarily from March through October. An ozone exceedance day is counted if the measured eight-hour average ozone concentration exceeds the standards.

Carbon MonoxideCOCarbon monoxide is a colorless, odorless, very toxic gas produced by the incomplete combustion of carbon-containing fuels, most notably by gasoline powered engines, power plants, and wood fires.

The eight-hour standard can be exceeded during winter months when very stable atmospheric conditions exist.

Sulfur DioxideSO2Sulfur dioxide is produced by burning sulfur-containing fuels (such as coal), smelting metallic ores containing sulfur, and removing sulfur from fuels. There are three sulfur dioxide standards which include a 24-hour average, an annual average, and a three-hour average.
Nitrogen DioxideNO2Although there are several oxides of nitrogen produced by high-temperature combustion, the only standard is for the annual average of nitrogen dioxide. This annual standard has rarely if ever been exceeded in the Unites States.
Particulate MatterPM-2.5
Particle pollution (also called particulate matter or PM) is the term for a mixture of solid particles and liquid droplets found in the air. Some particles, such as dust, dirt, soot, or smoke, are large or dark enough to be seen with the naked eye. Others are so small, they can only be detected using an electron microscope. Particle pollution includes inhalable coarse particles, with diameters larger than 2.5 micrometers and smaller than 10 micrometers and fine particles, with diameters that are 2.5 micrometers and smaller. How small is 2.5 micrometers? Think about a single hair from your head. The average human hair is about 70 micrometers in diameter -- making it 30 times larger than the largest fine particle. These particles come in many sizes and shapes and can be made up of hundreds of different chemicals. Some particles, known as primary particles, are emitted directly from a source, such as construction sites, unpaved roads, fields, smokestacks or fires. Others form in complicated reactions in the atmosphere of chemicals such as sulfur dioxides and nitrogen oxides that are emitted from power plants, industries and automobiles. These particles, known as secondary particles, make up most of the fine particle pollution in the country.

Coarse particulates (PM-10) come from sources such as windblown dust from the desert or agricultural fields (sand storms) and dust kicked up on unpaved roads by vehicle traffic. PM-10 data is the near real-time measurement of particulate matter 10 microns or less in size from the surrounding air. This measurement is made at standard conditions, meaning it is corrected for local temperature and pressure.

Fine particulates (PM-2.5) are generally emitted from activities such as industrial and residential combustion and from vehicle exhaust. Fine particles are also formed in the atmosphere when gases such as sulfur dioxide, nitrogen oxides, and volatile organic compounds, emitted by combustion activities, are transformed by chemical reactions in the air. Large-scale agricultural burning or sand storms can produce huge volumes of fine particulates. PM-2.5 data is the near real-time measurement of particulate matter 2.5 microns or less in size from the surrounding air. This measurement is made at local conditions, and is not corrected for temperature or pressure.

Return to Top

Interpreting the AQI

Air Quality Index

Each NAAQS pollutant has a separate AQI scale, with an AQI rating of 100 corresponding to the concentration of the Federal Standard for that pollutant. Additional information about the AQI and how it can be used is available from the EPA's AirNow web site.

Place your mouse pointer over the scale displayed above to view information about the Air Quality Index, and each of the rating levels.

The actual index calculation is different for each parameter measured and is specified by the EPA. The following table shows the various breakpoints used in calculating the AQI.

AQI Breakpoint Definitions
AQI Range 1hr Ozone
in ppm
8hr Ozone
in ppm
8hr Carbon Monoxide
in ppm
1hr Sulfur Dioxide
in ppm
24hr Sulfur Dioxide
in ppm
1hr Nitrogen Dioxide
in ppm
24hr PM-10
in µg/m³ (25° C)
24hr PM-2.5
in µg/m³ LC
24hr PM-2.5
in µg/m³ LC
0 - 50 Not Defined 0 - 0.054 0 - 4.4 0 - 0.035 Not Defined 0 - 0.053 0 - 54 0 - 12.0 0 - 12.0
51 - 100 Not Defined 0.055 - 0.070 4.5 - 9.4 0.036 - 0.075 Not Defined 0.054 - 0.1 55 - 154 12.1 - 35.4 12.1 - 35.4
101 - 150 0.125 - 0.164 0.071 - 0.085 9.5 - 12.4 0.076 - 0.185 Not Defined 0.101 - 0.36 155 - 254 35.5 - 55.4 35.5 - 55.4
151 - 200 0.165 - 0.204 0.086 - 0.105 12.5 - 15.4 0.186 - 0.304 Not Defined 0.361 - 0.64 255 - 354 55.5 - 150.4 55.5 - 150.4
201 - 300 0.205 - 0.404 0.106 - 0.200 15.5 - 30.4 Not Defined 0.305 - 0.604 0.65 - 1.24 355 - 424 150.5 - 250.4 150.5 - 250.4
301 - 400 0.405 - 0.504 0.201 - 0.2011 30.5 - 40.4 Not Defined 0.605 - 0.804 1.25 - 1.64 425 - 504 250.5 - 350.4 250.5 - 350.4
401 - 500 0.505 - 0.604 Not Defined 40.5 - 50.4 Not Defined 0.805 - 1.004 1.65 - 2.04 505 - 604 350.5 - 500.4 350.5 - 500.4
500+ Not Defined Not Defined Not Defined Not Defined Not Defined Not Defined 605 - 4999 500.5 - 999.9 500.5 - 999.9

PLEASE NOTE: This data has not been verified by the IDEM and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from IDEM ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.